CRB.H34.SLW.C7G-2

Electrical Configuration

Number of contacts High Voltage

34

Contact Termination High voltage

Solder

Insert configuration value

2P.H34 - 34 High Voltage

Insulator

L: PEEK for solder contacts

Rated current

1.2 A

Single wire jacket diameter max

0.7 mm (0.276 in)

ESD air discharge - IEC 61000-4-2: 2008 - 969 hPa / 25°C / 35 %HR

12 kV DC with standard model CAB.H34.SLW.C7G-2

Creepage (contact-contact) - Mated with straight plug

IEC 60601-1 -5.5 mm (0.217 in)

Creepage (contact-contact) - Unmated

IEC 60601-1 - 5.5 mm (0.217 in)

Air clearance distances (contact-contact) – Mated with straight plug

IEC 60601-1 - 5.5 mm (0.217 in)

Air clearance distances (contact-contact) – Unmated

IEC 60601-1 - 5.5 mm (0.217 in)

Air clearance - 1 or 2 MOOP - Mated with straight plug

IEC 60601-1: 2.8 kV DC / 11.6 mm (0.457 in)

Creepage 1 MOOP - Mated with straight plug

IEC 60601-1: 1 kV DC / 11.6 mm (0.457 in)

Test voltage contact-contact

5.6 kV DC

Bucket Dia.

0.4 mm (0.0157in)

Contact Dia.

0.5 mm (0.0197in)

Gender

Standard

Form & Material

Shell style / Model id

CR - Free socket with cable collet

Socket / Receptacle

Free

Housing material

PEI (Polyetherimide), grey

Locking system

Push-pull

Keying

B: 3 keys (alpha=0, gamma=60, Plug: male contacts, Receptacle: female contacts)

Colour

Grey

Weight

11.1 g

Environment

Technical domain

Medical : EP Catheter - Specially designed for mapping and PFA applications, Energy and Industrial, Test and Measurement, Transportation, Aerospace and UAV

Environmental sealing (IP rating)

IP50

Endurance

>1000 mating cycles

Temperature range

-50°C / +150°C

F retention

min 110 N

Steam sterilization

Fully sterilizable (Steam, Gamma, ETO) following our protocols and tests in line with ISO 11134 and IEC 60601-1 standards. For more details on sterilization methods and cycles, please contact us.

Note

This reference is sold in sets of 20 pieces and includes respective quantities of polyimide tubes and potting rings required for the cable assembly. Ordering individual references is not possible.

Cable fixation

Cable termination protection

Standard back nut (no additional protection)

Fixation type

Cable collet

Jacket cable outside diameter [mm]

5.30 - 7.20 mm