CAB.H34.SLW.C7G-2

Electrical Configuration

Number of contacts High Voltage

34

Contact Termination High voltage

Solder

Insert configuration value

2P.H34 - 34 High Voltage

Insulator

L: PEEK for solder contacts

Rated current

1.2 A

Single wire jacket diameter max

0.7 mm (0.276 in)

ESD air discharge - IEC 61000-4-2: 2008 - 969 hPa / 25°C / 35 %HR

15 kV DC with standard model CKB.H34.SLWG-2 or CRB.H34.SLWG-2

Creepage (contact-contact) - Mated with fixed socket

IEC 60601-1 - 4.8 mm (0.189 in)

Creepage (contact-contact) - Unmated

IEC 60601-1 - 0.28 mm (0.011 in)

Air clearance distances (contact-contact) – Mated with fixed socket

IEC 60601-1 - 4.8 mm (0.189 in)

Air clearance distances (contact-contact) – Unmated

IEC 60601-1 - 0.28 mm (0.011 in)

Air clearance - 1 or 2 MOOP - Mated with fixed socket / free socket

IEC 60601-1: 2.8 kV DC / 11.7 mm (0.461 in)

Creepage 1 MOOP - Mated with fixed socket

IEC 60601-1: 1 kV DC / 11.7 mm (0.461 in)

Test voltage contact-contact

5.6 kV DC

Bucket Dia.

0.4 mm (0.0157in)

Contact Dia.

0.5 mm (0.0197in)

Gender

Standard

Form & Material

Shell style / Model id

CA - Straight plug with cable collet

Plug

Straight

Housing material

PEI (Polyetherimide), grey

Locking system

Push-pull

Keying

B: 3 keys (alpha=0, gamma=60, Plug: male contacts, Receptacle: female contacts)

Colour

Grey

Weight

8.6 g

Environment

Technical domain

Medical : EP Catheter - Specially designed for mapping and PFA applications, Energy and Industrial, Test and Measurement, Transportation, Aerospace and UAV

Environmental sealing (IP rating)

IP50

Endurance

>1000 mating cycles

Temperature range

-50°C / +150°C

F retention

min 110 N

Steam sterilization

Fully sterilizable (Steam, Gamma, ETO) following our protocols and tests in line with ISO 11134 and IEC 60601-1 standards. For more details on sterilization methods and cycles, please contact us.

Note

This reference is sold in sets of 20 pieces and includes respective quantities of polyimide tubes and potting rings required for the cable assembly. Ordering individual references is not possible.

Cable fixation

Cable termination protection

Standard back nut (no additional protection)

Fixation type

Cable collet

Jacket cable outside diameter [mm]

5.30 - 7.20 mm